MasterMix and Packaging Limited are the industry leaders when it comes to waterproofing, packaging, and concrete solutions and products in New Zealand.
Waterproof Mortar Mix
Mastermix Waterproof Mortar Mix is our answer to projects that require a waterproof lining to form as part of the curing process.
Mastermix Waterproof Mortar Mix forms a waterproof lining for areas where water is to be stored, from water tanks, reservoirs and water treatment plants. It can also be used to refurbish existing water tanks and feeding troughs.
Further, it will provide, a breathable, but waterproof rendered finish to the external walls of houses and commercial buildings. It can even be pump/spray applied where large enough volumes permit.
At Mastermix we have a range of Mortar specialty products suited for variation construction requirements. Please contact our Technical Department for guidance on the best mortar product for your project.
Waterproof Mortar Mix forms a breathable waterproof layer:
- Large volumes can be pumped/sprayed
- Mix is waterproof from time of set
- Compressive strength
- Waterproof repair medium
- Suitable for potable water applications
- Compression of 22.5MPa after 7 days and 27.0MPa after 28 days
|Product Performance||As part of our commitment to developing the best products for your projects, Mastermix has maintained a 20 year history of rigorous testing via internationally recognised laboratories. We pay top dollar to put our products to the test so you don’t have to. OPUS Laboratory Results: Independent Independent laboratory tests have shown that that Waterproof Mortar Mix has a compressive strength of 22.5 MPa after 7 days and 27.0 MPa after 28 days. It meets NZ Standards 4210:1989 Code of Practice for masonry construction.|
|Packaging||Packed in 30kg waterproof bags. When stored in cool dry conditions it will have a shelf life of 3 months.|
|Instructions||Waterproof Mortar Mix should be mixed thoroughly, and evenly with 135mls : 1kg of product of clean potable water to the consistency required for the particular work being carried out. The ambient temperature affects the curing time of Waterproof Mortar Mix. It is best used in temperatures of between 7°C and 25°C. The water content will also affect the curing time. For cracks and breakouts: Simply pour the mixture into the cracks to level up and leave. For corroded areas: Pour onto the area and squeegee over to cover the affected area evenly. The product will set quickly to form an abrasive, resistant and flexible repair.|
|Coverage & Performance||New Zealand tests have shown that ‘WPM’ has a compressive strength of 22.5 MPa after 7 days and 27.0 MPa after 28 days. ‘WPM’ the meets NZS4210:1989 Code of Practice for masonry construction|
|Warranty||As part of our commitment to delivering the best customer experience throughout the project lifecycle, Mastermix Director Steve Douglas personally reviews each warranty request. Each Warranty period is awarded at our discretion and will only be considered where approved Mastermix product applicators are used.|
‘WPM’ is a cement based product and contains no additional aggressive
products. See packaging for full details.
The ambient temperature affects the curing time of ‘WPM’. It is best used in temperatures of between 7°C and 25°C. The water content will also affect the curing time
Although the technical details and recommendations Contained in this document correspond to the best of our knowledge and experience, all the above information must in every case be taken as merely indicative and subject to confirmation after long term practical applications.
For this reason, anyone who intends to use the product must ensure, beforehand, that it is suitable for the envisaged application. In every case, the user alone is fully responsible for any consequences deriving from the use of the product.