Master Mix – Mix & Pour

Keeping your dairy farm regulation with a strong, easy and sanitary concrete solution. Quick repairs without compromising on quality and durability - Mix and Pour is a high-performance repair kit which is completely inert and acid free. You don’t have to use MasterMix’s specific applicators to use this product, just mix it with your own tools and then pour it. Simple.
Master Mix – Mix & Pour
PRODUCT INTRODUCTION AND DESCRIPTION
MasterMix Mix and Pour is a recycled glass based concrete repairer, perfect for cracks in dairy floors and sheds as well as for the treatment of concrete corrosion caused by acid and alkali washes. It is a suitable repair product for most substrates. The key here is simplicity and convenience, anyone can simply mix and pour this product to get swift and impressive results so you can get your dairy farm back on track and ticking off all of your inspection boxes!
DOWNLOAD BROCHURE
details
Product Performance The adhesion strength of MasterMix Mix and Pour is better than 2.00N/mm2 on concrete and blockwork. The compressive strength is better than 20Mpa whilst still remaining flexible. Tests have been carried out against Sulphuric, Hydrochloric, and Lactic Acid, as well as Caustic Soda.
Packaging Mix and Pour comes in 10ltr pails and has a shelf life of better than 6 months when kept in dry, cool conditions in the original container with the lid securely on.
Instructions

Before beginning to mix the product, make sure the area to be repaired is clean and free from loose materials. Mix at a consistency of 400mls of potable water to 1kg to Mix and Pour product, using a mechanical mixing device.

For cracks and breakouts: Simply pour the mixture into the cracks to level up and leave. For corroded areas: Pour onto the area and squeegee over to cover the affected area evenly.

The product will set quickly to form an abrasive, resistant and flexible repair.
Coverage & Performance The Adhesion strength of MasterMix Mix and Pour is better than 2.00N/mm2 on concrete and blockwork. The compressive strength is better than 20Mpa whilst still remaining flexible.
Warranty As part of our commitment to delivering the best customer experience throughout the project lifecycle, Mastermix Director Steve Douglas personally reviews each warranty request. Each Warranty period is awarded at our discretion and will only be considered where approved Mastermix product applicators are used.
PRODUCT SUMMARY
Mix and Pour is a cement-based product and contains no additional aggressive products. See packaging for full details.
Optimum temperatures are between 7-25 Degrees Celsius.
Although the technical details and recommendations contained in this document correspond to the best of our knowledge and experience, all the above information must in every case be taken as merely indicative and subject to confirmation after long term practical applications. For this reason, anyone who intends to use the product must ensure, beforehand, that it is suitable for the envisaged application. In every case, the user alone is fully responsible for any consequences deriving from the use of the product.

Let's talk about your project

Call us: 06363686

DISCUSS YOUR PROJECT NEEDS

WITH OUR EXPERIENCED TEAM TO FIND OUT IF RTU45 IS RIGHT FOR YOUR PROJECT.
  • This field is for validation purposes and should be left unchanged.